Osburn Inspire 2000 Wood Fireplace Insert

Faceplate Option Details

Narrow Faceplate U-Shape

The Narrow Faceplate is U-shaped and used when the fireplace insert is going to be tight inside the fireplace and there is not much gap between the unit and the existing opening. It also provides the fireplace insert with an even more modern look. The U-Shaped Narrow Faceplate measures 1.75″ on three sides. U-Shape Faceplate Installation Guide(goes to new website)(opens in a new tab)

Narrow Faceplate

The Narrow Faceplate is a 4-sided faceplate used when the insert is tight inside the fireplace and there is not much gap between the unit and the existing opening. This will provide the insert with a thin flashing and modern appearance. You could elevate the insert by adding a row of bricks on the fireplace floor to raise the stove and the bottom portion of the Narrow Faceplate will give the insert the boxed in appearance of a picture frame. Narrow Faceplate Installation Guide(goes to new website)(opens in a new tab)

32″ x 50″ Cuttable Faceplate in 16 gauge

The 32″ x 50″ Cuttable Faceplate is used to flash around the fireplace insert when there is a wide gap between the insert and the fireplace opening. The Cuttable Faceplate is 16 gauge and can be cut using a grinder with a cutoff wheel. You can cut the faceplate to any shape needed. If you have a nice arched fireplace, you can cut the faceplate to match the arch preventing the flashing from covering a decorative arch. Cuttable Faceplate Installation Guide(goes to new website)(opens in a new tab)

Optional Accessory Details

Moulded Refractory Panel Kit for Minimalist Base and Insert

The Moulded Refractory Panel Kit is a great way to enhance the heat inside the stove which provides for a cleaner burning unit. The Moulded Panel Kit is also great for maintenance with less joints to clean out compared to fire bricks. The Minimalist Base Kit will have an extra panel to cover the clean-out trap.

5″ Fresh Air Intake Kit Oval

The 5″ Fresh Air Oval Kit is required if you plan on connecting a fresh air intake pipe. The oval adapter kit comes with the oval adapter, 2 clamps and the fresh air intake register hood. The oval adapter is intended for 5″ fresh air intake pipe. You will need to manually ovalize the flexible intake pipe to make the connection to the adapter. The oval adapter can be positioned on either side of the insert.

5″ Fresh Air Intake Register with Airtight Damper

The 5″ Fresh Air Intake Register with Airtight Damper opens and closes the fresh air supply to a wood insert. It’s simple mechanism makes it possible to close the damper tightly when the wood insert is not in use. This will ensure the wood insert is not being cooled while it is not in use. Fresh Air Intake with Damper Installation Guide(goes to new website)(opens in a new tab)

Optional Chimney Liner Kit

Rock-Flex 316Ti stainless steel chimney liner kits are UL listed and the perfect choice to install for your new wood burning insert. Each kit includes the 316Ti Flexible Chimney Liner, Vertical Appliance Connector, 13 x 13 in. Premium Top Plate, and Round Rain Cap.

Tax Credit Information

The Osburn Inspire 2000 Wood Fireplace Insert is EPA rated and has a HHV rating of 75% which qualifies for the wood and pellet stove tax credit through the end of 2032. From January 2023 through December 2032 you can receive up to a 30% tax credit for the installation and parts required, such as chimney liner and insulation. This is one of the largest tax credits the wood and pellet stove industry has ever had. If you are looking to update your old drafty fireplace consider the Osburn Inspire 2000 Wood Fireplace Insert.

Click here to view more information about the tax credit(opens in a new tab)

Osburn Tax Certificate(goes to new website)(opens in a new tab)

Osburn Efficiency Summary(goes to new website)(opens in a new tab)