Approx. Heating Area: 500 – 2,100 sq. ft.
Max Output: 75,000 BTU/h
Call us at 888-50-SWEEP for your best price.
The Enerzone Destination 2.3-I wood burning insert is a fresh take on the design of wood burning fireplace inserts. The contemporary cast iron flush mount surround is unlike anything in the industry and is the perfect picture frame for the large 18″ x 11 7/8″ glass door.
| Tax Incentive | Eligible for Tax Incentive |
|---|---|
| Brand |
The Enerzone Destination 2.3-I wood burning insert is a fresh take on the design of wood burning fireplace inserts. The contemporary cast iron flush mount surround is unlike anything in the industry and is the perfect picture frame for the large 18″ x 11 7/8″ glass door. The amazing appearance is a bonus on top of the powerful heating capabilities for the cold winter months.
Producing up to 75,000 BTUs allows the destination 2.3-I insert to heat up to 2,100 square feet. The 2.4 cubic foot firebox is capable of handling a 20″ log and offers up to an 8 hour burn time on one load of wood. The Destination 2.3-I insert is EPA certified non-catalytic secondary combustion wood stove with an optimum efficiency of 79%.
Do you have a large fireplace opening? If so, an optional backer plate is available to extend the cast iron surround and conceal the fireplace opening. The backer plate is available in 29″ tall by 44″ wide and 29″ tall and 50″ wide for large fireplace openings. A 90 CFM blower is included and is easily accessible through a streamlined drawer system that is unlike any other manufacturer in the industry.
The Enerzone Destination 2.3-I inserts contemporary design and heating capacity distinguish it from the competition and is sure to be the focal point of any room. The Enerzone Destination 2.3-I insert also qualifies for the wood and pellet stove tax credit through the end of 2032. See below for more details.
| Enerzone Solution 2.3-I Wood Insert Specifications | |
| Combustion technology | Non-catalytic |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Maximum log length | 20” |
| Log positioning | Loading over width |
| Chimney diameter | 6” |
| Flue outlet diameter | 6” |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height (feet) | 12’ |
| Baffle type | C-Cast or equivalent |
| Approved for a mobile home installation | No |
| Shipping Weight | 478 lb (217 kg) |
| Door type | Single, glass with cast iron frame |
| Glass type | Ceramic glass |
| Glass surface – dimensions (Width X Height) | 18″ X 11 7/8” |
| Glass air-wash system | Yes |
| Overall dimension (Height) | 25″ |
| Overall dimension (Width) | 35 7/8″ |
| Overall dimension (Depth) | 19 3/4″ |
| Door opening – dimension (Height) | 8 3/4″ |
| Door opening – dimension (Width) | 21″ |
| Firebox – dimension (Height) | 11 7/8″ |
| Firebox – dimension (Width) | 21″ |
| Firebox – dimension (Depth) | 16 3/4″ |
| Firebox lined with refractory bricks for better heat distribution | Yes |
| Stainless-steel secondary-air system improving gas combustion | Yes |
| Adjustable threaded legs | Yes |
| Steel thickness – body | 3/16″ |
| Steel thickness – top | 5/16″ |
| Fireplace opening – minimum (Height) | 23 3/4″ |
| Fireplace opening – minimum (Width) | 28 7/8″ |
| Fireplace opening – minimum (Depth) | 19 5/8″ |
| USA standard (emissions) | EPA Method 28 |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA standard (safety) | UL 1482, UL 737 |
| Canadian standard (safety) | ULC S628 |
| Tested and listed as per applicable standards | By an accredited laboratory (CAN/USA) |
| Warranty | Limited lifetime |
| Clearances to combustibles* | Canada | United States |
| Clearance – top (measured from the platform on which the appliance is installed)** | 84″ | 84” |
| Clearance – combustible side mantle to unit | 9″ | 9” |
| Clearance – Top mantle to unit | 27″ | 27” |
| Clearance – combustible side wall to unit | 16” | 16” |
| Clearance – minimum floor protection in front of the appliance | 18” | 16” |
| Clearance – from the top of the unit to the shelf | 19” | |
| Clearance – from the top of the insert to the shelf | 27” | |
| * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites). | ||
| ** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. | ||
The Faceplate Backing Plate is used when the standard flashing for the Enerzone Destination 2.3-I is not large enough to cover the opening of the fireplace. The standard Destination 2.3-I surround measures 35.875″ x 25″. The Faceplate Backing Plate can be used to extend the surround to seal off the fireplace. The Backing Plate is available in two sizes: 44″ x 29″ and 50″ x 29″. The backing plate easily installs to the back of the standard surround.
In the event the current fireplace is elevated above the hearth, then the Faceplate Backing Plate Kit is installed. The Bottom Faceplate Backing Plate is used to finish off this type of installation. This backing plate will provide the look of a picture frame around the insert. The Bottom Faceplate Backing Plate is available in both 44″ x 6″ and 50″ x 6″ sizes.
The 5″ Fresh Air Oval Kit is required if you plan on connecting a fresh air intake pipe. The oval adapter kit comes with the oval adapter, 2 clamps and the fresh air intake register hood. The oval adapter is intended for the 5″ fresh air intake pipe. You will have to manually ovalize the flexible intake pipe to make the connection to the adapter. The oval adapter can be positioned on either side of the fireplace insert.
The Rigid Fire Screen allows you to burn wood in the fireplace insert with the door open just like an old-time fireplace. Hear the crackle of the wood, watch the flames dance around in the firebox and relax around the wood insert on a cold winter’s night. The Rigid Fire Screen is easy to install and easy to remove when you are ready to load more wood. The fireplace insert should not be burning with the door open without the firescreen.
The Enerzone Destination 2.3-I wood burning insert is EPA rated and has a HHV rating of 75% which qualifies for the wood and pellet stove tax credit through the end of 2032. From January 2023 through December 2032 you can receive up to a 30% tax credit for the installation and parts required, such as chimney liner and insulation. This is one of the largest tax credits the wood and pellet stove industry has ever had. If you are looking to update your old drafty fireplace consider the Enerzone Destination 2.3-I wood burning insert.
Massachusetts: Acton, Amesbury, Andover, Arlington, Auburndale, Ayer, Bedford, Billerica, Boxford, Burlington, Byfield, Chelmsford, Concord, Dracut, Dunstable, Essex, Essex County, Georgetown, Gloucester, Groton, Hamilton, Haverhill, Hudson, Ipswich, Lawrence, Lexington, Lincoln, Lowell, Lynn, Lynnfield, Manchester-by-the-Sea, Marblehead, Maynard, Melrose, Merrimac, Methuen, Middlesex County, Middleton, Nahant, Newbury, Newburyport, Newton, Newtonville, North Andover, North Reading, Peabody, Reading, Rockport, Rowley, Salem, Salisbury, Saugus, Somerville, South Boston, Stoneham, Swampscott, Tewksbury, Topsfield, Tyngsborough, Wakefield, Wenham, West Newbury, Wilmington, Winchester, Winthrop, Woburn
New Hampshire: Brentwood, Candia, Chester, Danville, Derry, Epping, Exeter, Fremont, Hampstead, Hampton, Hampton Falls, Kingston, Londonderry, Newington, Newmarket, Nottingham, Pease, Rockingham County, Rye, Seabrook, Stratham, Windham
© 2026 Affordable Chimney Sweeps. 109 Davis Street • North Andover, MA 01845
Licensing, Certifications & Insurance | Sitemap | Accessibility Statement
Website Design by Compete Now.
